New Products

High Efficiency Micro TEC Controller TEC14MEV1.0

The TEC controller evaluation board TEC14MEV1.0 is consisted of a complete tuning and application circuit for driving a TEC. It can set the output voltage limit, tune thecompensation network, set internal operating temperature point, and has an LED for indicating the temperature status of the controller, and has numerous connection pads for making connections with external components and instruments. The TEC control module is located on the lower right of the TEC14MEV1.0 evaluation board. The voltages of all its pins can be measured directly by probing the vias on the left and right side of the module sockets which are connected directly with pins of the electronic module. Some of the pins are also connected to the soldering pads with two vias on the edges of the board. The names of all these nodes are marked on the board.

High Voltage Isolation Amplifier AD202KNATI

The AD202ATI series are high voltage isolation amplifiers designed for multiple applications where input signals are measured, processed, or transmitted without a galvanic connection. These isolation amplifiers in SIP or DIP package offer a signal and power isolation function.

Small Size: 4 Channels/lnch Low
High CMR: 130dB (Gain = 100V/V)
High Accuracy: ±0.2% Max Nonlinearity
High CMV Isolation: ±2000V Continuous
Isolated Power Outputs

High Efficiency Micro TEC Controller TEC14M5V3R5AS

The TEC14M5V3R5AS is an ultra compact, low profile, and fully molded TEC controller designed for driving TECs (Thermo-Electric Coolers) with high electrical andmechanical reliability that can achieve high temperature stability for regulating the object temperature.

High Reliability:  fully molded
Bottom Thermal Pad:  allows high power heat sinking
Maximum Output Current:  3.5A
Maximum Output Voltage:  ±VVPS
High Temperature Stability:  0.001°C

±1800V High Voltage Amplifier AHVAPN1800V20MA

The AHVAPN1800V20MA is an electronic module for amplifying an analog input voltage into a high voltage output.  It comes with a high voltage DC-DC converter, which converts the 24V input voltage into two output voltages: −1800V and +1800V. The analog input voltage, VIN(t), can be from −10V to +10V, the corresponding output voltage,

Built-in High Voltage Power Supply
Bi-directional Output:  ±1800V
High Current Capability:  Up to 20mA
High Slew Rate;&:nbsp; 2000V/µs@open load
Input Signal Voltage Range:  ±10V

High Voltage Power Supply AHV24V30KVR5MAW

Shows the connecting wires of AHV24V30KVR5MAW, of which their detail information given .

Input Power Voltage:  24V ±1V
Input Current Range:  200mA to 900mA
Output Voltage:  0 to 30kV@CTRL = 0 to 5V
Monitor Voltage:  0 to 3V
Max. Output Current:  0.5mA
Product Lines
Laser Drivers
TEC Controllers
Digital TEC/Fan Controllers
High Voltage Power Supplies
Adjustable Decade Boxes
Isolated DC-DC Power Modules
High Voltage Amplifier/Piezo Drivers
SMD Component Kits
Switching Power Supplies
High Voltage Isolation Amplifiers
TEC Modules
Thermistors

Founded in 1997, Analog Technologies, Inc. (ATI), specializes in the R&D and production of analog and digital electronic hardware modules, sub-systems, and systems. Our main product lines include: laser drivers, TEC (Thermo-Electric Cooler) controllers, TECs (Thermo-Electric Coolers), high precision and high stability thermistors, customized heat sinks, SMT (SMD) resistor kits, SMT (SMD) capacitor kits, SMT (SMD) inductor kits, LED drivers, LED lights, etc.

0
Add To WATCHLIST(0)
Empty